皮带对中仪

快速精准的皮带对中

SKF TMEB 2将皮带轮对中皮带轮槽。对中仪只有两个装置，即激光发射装置和接收装置，并通过V形导轨和强力磁铁固定。接收器上的三维目标区域使其易于检测不对中，以显示被测单元是否水平、垂直、平行或三者的结合。操作员可容易地进行相应的调整。

Features and benefits

Easy-to-use, requires no special training to operate
No trial and error: the laser position indicates the nature of misalignment allowing easy and accurate adjustment
Powerful magnets allow fast and easy attachment
Three-dimensional target area simplifies the alignment process
Facilitates simultaneous adjustment of tension and alignment
V-guides facilitate the alignment of a wide range of V-belt pulleys
A maximum operating distance of 6 meters (20 ft)
Special side adaptor allowing alignment of multi-ribbed and timing belt pulleys as well as chain sprockets is available as accessory

Technical data
Designation	TMEB 2
Content	1 laser unit 1 receiver unit 3 sets of V guides Carrying case
Housing material	Extruded aluminium
Type of laser	Diode laser, class 2, 1 mW
Laser wave length	632 nm
Measurement distance	50 mm to 6 000 mm (2 in to 20 ft)
Fixture	Magnetic
Measurement accuracy angular	Better than 0.2°
Measurement accuracy linear	Better than 0.5 mm
Dimensions laser unit	70 x 74 x 61 mm (2.8 x 2.9 x 2.4 in)
Dimensions receiver unit	96 x 74 x 61 mm (3.8 x 2.9 x 2.4 in)
Battery type	2 x 1.5V LR03 (AAA) batteries in laser unit
Battery lifetime	20 hours continuous operation
Weight laser unit	320 g (11.3 oz)
Weight receiver unit	270 g (9.5 oz)
Calibration certificate	Valid for two years
Warranty	12 months
Accessory / spare parts
TMEB A2	Magnetic side adaptor for chain sprocket, multi-ribbed and timing belt pulleys
TMEB G2	Set of V-guides, 4 different sizes